Vehicle Fitment Guide

2024 Audi A4

Complete wheel fitment specifications, compatible wheel sizes, and clearance guide

Stock Wheel Specifications

Tire Size
245/35R19
Bolt Pattern
5x112
Wheel Width
8.5 inches
Offset
+40mm
Wheel Diameter
19 inches
Hub Bore
66.5mm
Lug Nut Size
14x1.5mm

Stock Wheel Specifications

The 2024 Audi A4 represents refined German engineering with a focus on balance between comfort and performance. Factory wheels are 19-inch units with 245/35R19 tires and a measured +40mm offset. The 5x112 bolt pattern is standard across Audi, Volkswagen, Porsche, and BMW platforms. The A4's sport-tuned suspension complements a wide range of aftermarket wheel fitments.

Compatible Wheel Sizes

The A4's mid-size platform offers good flexibility in wheel sizing while maintaining ride quality:

Wheel Size Tire Size Width Range Offset Range Notes
18 inches 225/45R18 8.0–9.0" +35 to +50mm Better ride comfort, lighter weight
19 inches 245/35R19 8.5–9.5" +35 to +45mm Stock size, excellent selection
20 inches 255/30R20 9.0–10.0" +25 to +40mm Aggressive stance, stiffer ride

Popular Aftermarket Setups

Bolt Pattern Explained: 5x112 for the A4

The 5x112 bolt pattern connects the A4 with other premium European platforms. Wheel selection is extensive from both Audi-specific and universal manufacturers. The 66.5mm hub bore is medium-sized and requires verification when cross-shopping wheels designed for other platforms.

Cross-compatibility: VW wheels (57.1mm hub) and BMW wheels (72.6mm hub) will not fit without hub-centric rings. Always verify before purchasing.

Offset Guide for the 2024 A4

The A4's +40mm offset is the sweet spot for the platform. The quattro all-wheel-drive system's load distribution works optimally with this offset range.

More positive offset (+45mm to +55mm): Wheels tuck deeper. Preserves factory handling characteristics. Ideal for aggressive lowering.

More negative offset (+25mm to +40mm): Wheels sit further out. Creates modern squared-off stance. Impacts understeer characteristics if too negative.

Recommended range: +35mm to +50mm. Deviating significantly affects quattro grip distribution.

Fender Clearance Notes

The A4's compact platform has good fender clearance but tight suspension geometry. Aggressive fitments require verification.

What fits safely: 19x9.0 +35mm wheels on stock suspension.

What requires testing: 20-inch setups. Verify suspension articulation over bumps, especially with lowering springs.

Use the WillItRub Calculator

Try the Calculator

Frequently Asked Questions

Q: Can I use Volkswagen wheels on my A4?

A: Bolt pattern matches (5x112), but hub bore differs. VW uses 57.1mm, Audi uses 66.5mm. Hub-centric rings required. Not ideal.

Q: What about square wheel sizing instead of staggered?

A: Works fine. Handling balance shifts slightly but most drivers won't notice. Square setups offer more tire/wheel flexibility.

Q: Is 20-inch sizing recommended for the A4?

A: Visual impact is dramatic, but tire costs triple. Most owners prefer 19-inch for value and ride quality balance.

Q: Should I run performance or sport summer tires?

A: For the A4, performance summer tires are ideal. The quattro system benefits from maximum grip. Winter tires are a separate setup.

Q: What lug nut torque spec for the A4?

A: 130-140 Nm (96-103 ft-lbs) for the 14x1.5mm lug nuts. Use a calibrated torque wrench for consistency.

Recommended Wheel Fitment & Installation Gear

Ensure a safe install and accurate clearance measurements using these recommended tools:

Torque Wrench
LEXIVON 1/2" Click Torque Wrench

Essential for torquing lug nuts to exact specs after installing spacers or custom wheels.

View on Amazon
Fender Tool
Eastwood Fender Roller

Perfect tool to gently roll inner fender lips for maximum tire and wheel clearance.

View on Amazon
Maintenance
Performance Stud Cleaner

Cleans corrosion off wheel studs to guarantee a safe, flat fitment on the hub face.

View on Amazon
As an Amazon Associate, we earn a commission.
\n

Contact: hello@insolveo.com

@helloinsolveo